Finished sizes in mm. Length runs with the grain. Edges = how many long and short edges get banded.
Paste a cutting list
One part per line: name, length, width, qty. Commas or tabs, straight from a spreadsheet.
Load the van
| Board | Qty | Each | Total |
|---|---|---|---|
| 18mm Birch ply 2440×1220 | 2 | 36.4 kg | 73 kg |
| ↳ Offcut 1180×610 · Rack B | 1 | 9 kg | |
| 18mm MR MDF 2440×1220 | 1 | 40.2 kg | 40 kg |
| 6mm MDF 2440×1220 | 1 | 13.4 kg | 13 kg |
| Edge banding | 14.8 m | ||
Costing
| 18mm Birch ply | 2 × £78.00 | £156.00 |
| 18mm MR MDF | 1 × £36.00 | £36.00 |
| 6mm MDF | 1 × £17.00 | £17.00 |
| Edge banding | 14.8 m | £12.55 |
| Cost | £221.55 | |
| Charge client | +15% | £254.78 |
10 reusable offcuts left (3.97 m²).
Workshop pack
PDF for the bench: board order, exploded unit drawings, every sheet drawn to scale with dimensions and numbered cuts, and the full cutting list.
Part labels
One sticker per part with size, board, sheet number and banded edges marked. Prints on Avery L7160 (21 per sheet).
Cut-to-size order
Parts list as a spreadsheet (CSV) with sizes, quantities, grain and edging, ready to import into Cut Rite or upload to a panel cutting service.
Board order
The sheets, banding and offcuts for this job as text, to paste into an email or message to your merchant.
Units
3 unitsTap a part to find all its copies.
18mm Birch ply
2 sheets + 1 offcut77.0% yieldGrain lockedSheet 1 of 3Offcut · Rack B
1180×610 · 73%Parts on this sheet (1)
| Part | L×W | Qty |
|---|---|---|
| End panel | 870×600 | 1 |
Cut sequence (2 cuts)
- Cross-cut at 870 mm (610 long)
- Rip at 600 mm (870 long)
Sheet 2 of 3
2440×1220 · 81%Parts on this sheet (6)
| Part | L×W | Qty |
|---|---|---|
| Base 600 · Side | 720×560 | 6 |
Cut sequence (10 cuts)
- Trim 10mm off all four edges first
- Cross-cut at 720 mm (1200 long)
- Rip at 560 mm (720 long)
- Rip at 560 mm (720 long)
- Cross-cut at 720 mm (1200 long)
- Rip at 560 mm (720 long)
- Rip at 560 mm (720 long)
- Rip at 560 mm (974 long)
- Cross-cut at 720 mm (560 long)
- Cross-cut at 720 mm (637 long)
- Rip at 560 mm (720 long)
Sheet 3 of 3
2440×1220 · 74%Parts on this sheet (12)
| Part | L×W | Qty |
|---|---|---|
| Base 600 · Base | 564×560 | 3 |
| Base 600 · Top rail | 564×100 | 6 |
| Base 600 · Shelf | 562×540 | 3 |
Cut sequence (16 cuts)
- Trim 10mm off all four edges first
- Cross-cut at 564 mm (1200 long)
- Rip at 560 mm (564 long)
- Rip at 560 mm (564 long)
- Cross-cut at 564 mm (1200 long)
- Rip at 560 mm (564 long)
- Rip at 100 mm (564 long)
- Rip at 100 mm (564 long)
- Rip at 100 mm (564 long)
- Rip at 100 mm (564 long)
- Rip at 100 mm (564 long)
- Rip at 100 mm (564 long)
- Cross-cut at 562 mm (1200 long)
- Rip at 540 mm (562 long)
- Rip at 540 mm (562 long)
- Rip at 540 mm (720 long)
- Cross-cut at 562 mm (540 long)
18mm MR MDF
1 sheet52.2% yieldSheet 1 of 1
2440×1220 · 52%Parts on this sheet (4)
| Part | L×W | Qty |
|---|---|---|
| Base 600 · Door | 717×597 | 3 |
| Plinth | 1800×150 | 1 |
Cut sequence (6 cuts)
- Trim 10mm off all four edges first
- Rip at 597 mm (2420 long)
- Cross-cut at 717 mm (597 long)
- Cross-cut at 717 mm (597 long)
- Cross-cut at 717 mm (597 long)
- Rip at 150 mm (2420 long)
- Cross-cut at 1800 mm (150 long)
6mm MDF
1 sheet43.5% yieldSheet 1 of 1
2440×1220 · 44%Parts on this sheet (3)
| Part | L×W | Qty |
|---|---|---|
| Base 600 · Back | 720×600 | 3 |
Cut sequence (4 cuts)
- Trim 10mm off all four edges first
- Rip at 600 mm (2420 long)
- Cross-cut at 720 mm (600 long)
- Cross-cut at 720 mm (600 long)
- Cross-cut at 720 mm (600 long)